你好只是想知道浴室的地板上,已经做了什么是正常的,得到一些建议如何解决一些如果可能的话。有一个浴室钳工来取代瓷砖与乙烯浴室地板。瓦略不均匀和灌浆分手的地方。钳工说不均匀很糟糕,他会看到下面地板是什么样子,可能需要平整等。经过约四小时的钻探和砸他说,董事会由水槽被压在管道工程和董事会本身也不是伟大的条件。会得到厚度等等,那么乙烯。8毫米厚度是买了,他开始削减躺,几小时后,他得到了乙烯基阶段我离开了他,只是偶尔问如果是好的,他说,是的,但“太多,太多,大得多的工作”等等。最终,10个小时后,他消失了,离开了。当他走后,我去到那里有一个很好的看,(和大规模的清理)我很困惑。乙烯已经铺设,但有浴缸沿两侧的空白,看起来他只是削减模糊,没有乙烯的洗手盆和马桶,地板和粘合剂,有块和涂片的样子干褐色胶在厕所和水池的底部,和白色粗线密封胶将四周的边缘踢脚板的边缘乙烯和圆形水槽和厕所的基础。到处blob和涂片密封剂在木制浴板的边缘,我想试图填补空白。 Looks like lots of scuff, scrape type marks on the bottom of the bath panel and skirting. Looks like I will have to paint all the skirting (and the whole bathroom) and get some kind of panel/cut down skirting to go under the bottom of the bath panel to hide the mess. Couple of places had slightly mismatched vinyl laid, as if he had cut wrong and found another bit to stick down. Will I have to now replace the toilet and sink units as I can't see how I can get all the blobs and smears of brownish adhesive off them without damaging them? They look a mess. He is supposed to be coming back later this week to do other bits but I am not sure now, don't want him leaving my bath tiles a wreck if he replaces the glass shower screen. Very nice man, but I am a bit taken aback at the finish to be honest. At the moment would rather just give him his money now for the flooring and say (nicely) don't bother coming back. Bit worried now. Thanks.