You dont need lime in the mix.
4/5 builders sand to 1 cement.
add some plasticer to mix as per instructions.
你不会有任何问题的。
Get yourself a decent spirit level and mark up a gauging rod. cant go wrong

forget the lime, use a 4:1 sand/cement mix and plastisizer (feb) or failing that a spot of washing up liquid let it mix, don't use too much water as the plastisizer/fairy will make the water wetter! if the bricks are dry and the weather hot it might be an idea to soak the bricks first but in this weather you should be ok. good luck

HI
I WOULD USE A MIX OF 4 PARTS SAND TO 1 PART CEMENT.TO STOP THE MORTAR FROM BECOMING UNWORKABLE IF YOU ADD A CAP FULL OF PLASTICISER TO A BUCKET OF WATER THIS SHOULD GIVE YOU TIME TO USE ALL THE MORTAR UP.
HOPE THIS HELPS YOU.

ANDY

forget the lime!. 4to1 sand+cement with a touch of feb (plasticiser). make it quite soft so you can move bricks gently into position. Once mortar starts going off use a fine water spray to stop it drying out too quickly.

绝对不要用石灰。对大多数砌砖来说，四砂一水泥就可以了。一些建筑商混合5沙子和1水泥，但砂浆没有可操作性，这就是为什么你挣扎。如果你没有使用塑化剂的经验，它会给你更多的时间。

lime mortar does not set the same as sand and cement mortar.this is why you can still pull them of the next day.as you have a concrete base you should use a sand +cement mix with plastercier.mix should be like soft icecream.if you do wish to lay in lime mortar.if mixing by hand dry mix all components until one colour best on a board then take some of it ad water slowly .this way what you dont use can be put in a bag until you get chance to use it.if mortars drying out to quickly on the brick you can wet the bricks up before us so they dont suck out all the moistier.but let drip dry before use. hope this helped.

A lime mortar is not really suitable for this type of work, as it slows down the hardening process I would use a sand and cement mix of 4:1 if the sand is very soft try replacing one part of the sand with a sharp sand or fine grit, this would give the mortar more body.

The use of a plastisicer, easy available from any diy store, screwfix etc, is a must, only use the correct amount stated.

Try and get the mortar well mixed first in small batches, then add small amounts of water at a time to get the right consistency, its a mistake to use too much water, the art is in the mixing !

4 to 1 sand and cement in a bucket with a guaging trowel , mix dry first, then add a bit of fairy liquid and be carefull to add water a bit at a time as you could easily make a sloppy mix ! disasterouse for diy brickies!.
mix it untill you break a sweat and it will be like angel delight!.
consider buying the brickie mate as your no brickie mate , all the best :)

HI, I wouldn't use lime in a barbecue, as you are not a bricklayer - you are making hard work for yourself. Lime is very hard to handle if you don't have the experience. I would use a 4 parts cement to 1 part sand mix.you can get a fire cement which helps with not cracking the mortar when the barbie gets hot. Take your time with setting out the first course first, as this is the most inportant course. Even do yourself a sketch first.

All the best,
Nick

Ideal mix would be 6 parts soft (building sand) 1 part Portland cement 1 part hydrated lime and mix a mortar plasticiser with a bucket of water and use this to knock up a mix. Mortar plasticiser can be bought cheaply from Any diy store. This will stop the mortar drying out too easily and keep it workable for a longer period of time. Hope this was helpful.

嗨，我建议不要使用石灰来提高可加工性，而是使用石膏(feb mix)。按照制造商信息上的指示使用。当混合砂浆时，使用4:1的比例(沙子和水泥)。当你进行工作时，确保第一种方法是正确的，因为这是最重要的方法，如果你发现砂浆仍然在快速燃烧，试着在混合物中添加缓速剂，可以防止砂浆快速燃烧。

Hope this helps.

It sounds like you're not getting enough air into the mortar to allow you to lay the brick correctly and also aid adhesion to the brick. You should also be using soft sand only.
If you are using a proper mixer, put some water (half a pail) in first. Then add the cement and lime, allow this to mix up, if it is very stiff at this stage add more water, then add your sand. Leave it to work and allow it to mix before adding any more water. You want it to be like a cake mix consistency with plenty of air in it. Be patient. If you add too much water too early it will just turn to soup!
如果它只是粘在搅拌机上，关掉它，刮掉，加入更多的水，再次混合。

Like other trademan has said 4/5 builders sand 1 cement
Your first course of brick is the important course because you will be working to that course a good gauge and Spirit level and your off to go

Just use a simple 4-1 mix with plasticiser.

5 sand and 1 cement with a small cap full of Feb mortar mix if it is high quality building sand best way to mix is throw 3 sand in the mixer then cement then the last 2 sand so it is mixes easier then add a dash of water bit by bit allowing to mix corrrectly and not making it to wet and unusable as it will dribble on face of brickwork

4to1 sand+cement with a small amount plasticiser make it quite soft so you can move bricks gently into position. Once mortar starts going off use a fine water spray to stop it drying out too quickly.